9 replies
by matthew.durbahn Accepted solution
by cg it Accepted solution
to VPN in you have to go out to the internet and then come back in, most admins don't allow bypass on their perimeter routers just for the reason you mention.
have you tried the default adminisrator account? Most admins will change the name of the default admin account and set a strong password so you might try that account and see if you can get in.
If this is a domain, if you log on locally your not logging on to the domain so, it's possible you created a admin account on the local machine and not the domain.
Yosemite or NT Back either works. Backup Exec as well.
Might consider a NAS or SAN backup solution rather than tape.
by matthew.durbahn Accepted solution
by cg it Accepted solution
doesn't get you to the domain.
you have to specify the domain name [netbios] or use @.com/net/org/ at the log in box.
Sorry but you can access files on the machine but your not accessing the domain.
If you don't have a domain admin account and password available and the guy who set it up isn't available to give it to you, there's not much you can do.
by anders_emajl Accepted solution
Hi,
My first thought was that the setting that allow you to logon to your machine have changed, allowing you to logon to the local machine ie server only.
try to logon to the server with your username with "remote desctop connection". use %SystemRoot%\system32\mstsc.exe
by matthew.durbahn Accepted solution
I tried the remote connection, and it says
The client could not connect. You are aleady connected to the console of this computer.
by matthew.durbahn Accepted solution
by cg it Accepted solution
if you sat down at the DC and tried to log in to the domain, you can?
it's when you try remote desktop from your laptop that you can't?
check the remote desktop settings on the server so that your account is authorized for remote admin.
That message that says your already logged in means one of 2 things. 1) that your logged in locally to the machine under your account or 2) that somewhere on the network, your user account is already connected to the server [RDP remote admin] so it's not going to let you log in twice. In remote admin mode, the server limits to 2 active sessions [if I remember right] . log out on the other session should remedy the problem.
by jackisforlife Accepted solution
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending