Question Locked

Cant Ping Domain Controller on Server 2003

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I just turn on my DC for my new domain and can only ping it from itself. The fire wall is off. I can't ping out to other machines or ping in from other machines. Any ideas

5 replies

by churdoo

Well you haven't supplied much information so I'll start with the most obvious.

How do the clients get their IP addresses? Static? DHCP? In the IP settings of the clients, is the IP of the DC their first DNS resolver? Confirm this with an IPCONFIG /ALL at one of the clients. Are the clients and server within the same IP network? Have you joined the clients to the domain / active directory? You say you can't PING, I presume you mean by name, have you tried pinging individual IP addresses instead of workstation/server name, and what are the results?

Provide some more info and answer these questions and I'm sure we can help.
--C

by wstreet

Background: Our network controller is a Samba linux. Sorry if I didn't say that right. I know less than 0 about linux. I am trying to migrate to Active Dir on a VM Win 2003.We have a 10.10.xxx.xxx network range.
Within that range I chose a section of addresses that were un-used and will be using that for my new windows domain.This new domain will be deltaregional.local.

Currently: I turned on Active Directory and DNS on the new server. Now I am trying to ping the static IP of the DC and DNS (10.10.25.1) from our current network. I have a test machine I am trying to add to the new domain to now avail because I can't ping from the client to the server or from the server to the client. Firewall is off on the server. Is this something stupid I am forgetting or is this linux related or a server config issue????? Thanx again for the help

by clarkd038

following up on the earlier post, on your local machine that you are trying to connect to the domain, have you checked the IP on that machine. This would verify that you are on the same subnet.

by wstreet

Yes I put a static IP (10.10.25.5) in the same range as my DC and DNS. This did not work either. Since this last post, I have demoted the server down to "just a server" and still cant ping it so Im thinking it may be a linux/Samba issue. Still working on it. Will keep posting with each new development.Suggestions appreciated.

This discussion is closed to new replies.