4 replies
by techbro
Try this sequence:
1) make sure the DHCP is turned on in the router setup.
2) make sure that wireless is turned on. On the Linksys routers, this is either on the main setup page or on a subpage named "Wireless" or something similar.
3) Make sure that WEP is enabled. I suggest that you use the 128bit key. Remember the passphrase but also copy the WEP key that is generated into Notepad and print it out. This maybe useful if you need to enter the actual key on one of your other computers, instead of the passphrase.
4) Change the SSID to something other than "Linksys" and use a channel other than 6. Just a suggestion.
Okay, now I am going to have to assume that you used the Linksys CD to install the wireless cards and drivers for this next sequence of steps to work.
5) Turn on one of your computers that has a wireless card. There should be a Linksys icon in the system tray. Click on that to show your card status. If it has a setup wizard, you should be asked for the SSID, channel, and WEP passphrase. That should do it.
Hope this helps.
by cdeanprice
Just to clarify, I have internet access on all machines and am getting a very good wireless signal to all machines. My problem is my inability to network these machines, I am unable to see any of them from the other .
I will however try the WEP again, thanks TechBro
by lmon
by wlbowers
Sharing must be enabled on all computers.
Each machine must have user accounts set up for the other machines.
Firewall on the xp machines must be configured correctly.
Lee
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending