Question Locked

CDR won't let me add files (read-only?)

0 helpful
14 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I copied a few files off of floppy disks and saved them to my Windows ME. When I put a disk in D: drive and try to copy or save my files to that disk, it says access denied, folder is marked as read only. I know there is no files on the disk and I've tried at least six or seven disks and all say the same thing. I odn't understand. What can I do to fix this?

14 replies

by thumbsup2

Silly questions first.

Is it a CDR or CDRW drive? CDR's can't write.

What type of media are you putting into the drive? New or previously use? CD-R or CD+R? What speed of CDR media are you putting into the drive? Is it an old drive that can not accept CDR media for 48X speeds? Does it require CDR media that is for drives of speeds lower than 16X or even 4X?

More questions.

Did it work previously and just stop functioning? Could be the drive went out. Could be bad disks. Could be something changed the drivers on the CDRW so that now it thinks it's not a writer any more. Could be lots of things.

One thing is for certain. We can't help diagnose the problem without more details. Please be more specific.

by older mycroft

You can't copy files to an optical disc the same way you copy files from floppy to hard drive.

Have you 'just' been dragging files to your D: drive?

Because if you have it won't work. You have to use a CD burning program.

by nicknielsen

The CD-burning software on my WinXP home-built will allow you to drag and drop files to the "CD." After you are finished, it then asks if you wish to actually write the files to the drive. It's sort-of drag and drop.

by thumbsup2

In the original post, SillyGoose said they had Windows ME.

I don't remember now, so correct me if I'm wrong. But, I don't think ME was capable of drag n drop then write to CD without 3rd party software. I believe you had to first create a project full of selected files, then tell it to burn/write.

I didn't use ME for long, switching back to 98SE as soon as possible because ME was so unstable. However, I do remember having Roxio Easy CD Creator software (DirectCD) and that trying to drag n drop wouldn't work at all. I had to go through the project creator. Could be though that DirectCD just had control of the drive and wouldn't allow Windows to touch it.

by older mycroft

If by 'drag-and-drop' you are referring to Roxio, then I'll just say I wouldn't even use it's installer disc if I ever ran out of toilet paper.

I found Roxio to be wholly unstable and prone to doing just what this poor fellow is describing, although I'm assuming he's NOT using it.

by thumbsup2

I was SOOOOOOOOOO happy when XP came along with native CD writing capabilities and drag n drop. But, back then, there were few choices. Especially for newbies who just got their first CD Writer.

by nicknielsen

But not much. I'm used to working with IBM products, so Veritas Software's Drive Letter Access has been in the picture since at least Windows 2K.

The problem there is trying to figure out if/when you are finished adding files to the CD so you can run the compatibility utility and make the contents of the drive visible to other PCs.

by nentech

To write to CD R or CD RW you will need a CD recorder or writer

Look on the front of the CD drive, Make sure it says recorder or RW

For windows Me you need to have software to burn or write to the recordable disks
Windows Me had no built in software or any thing that could work with a CD writer
You need something like Nero burning rom or easy CD writer

CD R stands for ?Compact Disk Recordable? these disks can only be written to once
But you can add more to the disk until you close or finalise it
These are call sessions or can be called tracks
CD RW stand for ?Compact Disc ReWritable?these disk can be erased so they can be reused

Some of the older CD writers can not or will have trouble writing to the new CD R or RW disks

You can check this post of NickNielsen for free software for making your own disks

https://www.techrepublic.com.com/5208-6230-0.html?forumID=101&threadID=239198&messageID=2329198

Good luck
Hope this helps
When you post don?t forget this is old stuff to us IT Pros (Clowns?)
So just take what you need to get you going

Col

by dadspad

or the whole Roxio program? I do not like the Drag to Disc software, but have been using Roxio 6 for a while, but now use Roxio 8. I would go back to Roxio 6, but it would not recognize some new music files.

by older mycroft

At least that's what it looked like, or maybe a tumble dryer.

Either way, whatever it was supposed to look like I reckon a washing machine or tumble dryer would've had better success at burning optical discs than that particular pile of poo!

I'm using Nero 7 Ultimate Edition and am verrrry happy thank you.

It's just a pity that the dawn of optical storage had to start with such a criminally inefficient package, easily bettered by any domestic washing machine.

by dadspad

Does look like a washing machine :) Even if I tell it not to install, it does anyway.

Cannot get used to Nero, for what I do, seems more complicated than it needs to be. The parts of Roxio that I use do me very well. I do use the basic Nero 7 to burn lightscribe labels and sometimes to copy cd/dvd.

Note: Roxio has changed since bought by Sonic. So may have to re-evaluate in future.

This discussion is closed to new replies.