Discussion Locked

Changing a Motherboard and a CPU on a Wi

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Now the system dont start
How to reset the drivers and hardware configuration and mout a new
Motherboard and CPU and find the new hardware???
How this work in a hardisk with Win2000 SO already install?

URGENT Please

5 replies

by djent

Set display to default VGA, leave peripheral cards out, start in safe mode and detect hardware. Then replace cards and add drivers. Install MB drivers from vendors disk.

by jailbreak

Trie all startups from the F8 menu, but none work
All have the same error on startup the windows
NO_BOOTABLE_DEVICE
Then when i put the old motherboard and old cpu, the system start just fine

by ghy

I suppose the BIOS knows about the hard drive or other bootable devices? CMOS battery is good on new MB?

by jailbreak

Hi
Tanks for your post. But the problem is that I cannot start the pc with the Win2000. I already try all the options from the F8 menu in the startup windows, but none work. In the startup say NO_BOOTABLE_DEVICE.
The problem is in Windows 2000 nota hardware problem.
When I put again the old motherboard and the old CPU the system start and work just fine
The problem is that Windows 2000 don?t like some upgrade that makes changes in the startup of the system, like motherboard and IDE divers,etc.

I now that there are some ways to do that.

In a Win9x, we just delete the drivers and peripheral from the system, and the new motherboard and drivers the system will find and install.

by dgarciagorritz

I have gone thru this before. You will need to reinstall Windows using your CD. Boot from the CD etc.

One more thought, if you have AGP video you may need to leave the slot next to the card empty. This happened to me and it is because my video card does not want to share the interrupt with the slot.
Hope this works!

This discussion is closed to new replies.