Question Locked
0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am expieriencing calls breaking up on two models of Cisco phones, the 7902 and the 7912. I have 7940's and 7960's that work fine on the same 3560 POE router. They are all being ran by Cisco CallManager ver. 4.1 and each model phone has the latest software versions. Has anyone expierenced this problem?
3 replies
by smitchell Accepted solution
Clarifications
by timbrewolf Accepted solution
If you don't already, you may want to turn Diffserv on since Cisco will automatically handle the voice packets QoS.
The other best practice is to VLAN your phones away from the network and setup QoS manually.
Breaking up, static, and performance issues are usually related to traffic management. I'm not familiar with those phones, but it could be the later models have some better packet management built in.
by mjd420nova Accepted solution
Too many problems with breaking up and static can be caused by loose or improperly terminated RJ connectors, on both ends, not just the phone but any wall jacks and rack connections.
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending
Question Unanswered
How Can IT Teams Detect Hardware Bottlenecks in Business Networks?
0 helpful
0 replies
Question Locked
Using multi-NIC setup for NAS + router — better than VLAN?
0 helpful
4 replies
0 helpful
5 replies
Question Locked
Unknown device connected to my network
0 helpful
2 replies
Question Locked
How to change public IP without ISP?
0 helpful
2 replies