Question Locked
0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Ive been trying to give access from admin vlan to every other vlans on the the network and deny the ip protocols from the other vlans to admin vlan and it just doesnt work ! Can anybody come up with a suggestion or a solution to this problem ive been having . cisco project it is that im working on . thank you
2 replies
by hesam_6 Accepted solution
Clarifications
by scott_heath Accepted solution
interface Vlan_Admin
description Admin Network
ip address 10.0.1.1 255.255.255.0
ip access-group From_Anywhere in
no shut
ip access-list extended From_Anywhere
remark Restrict traffic from rest of network
permit tcp any host 10.0.1.50 eq 22
deny ip any any
The above example set an ACL called From_Anywhere to retrrict inbound traffic to the Vlan_Admin. It allows any host to use port 22 to connect to host 10.0.1.50 but denies all other traffic. You can obviously change the ports and such as needed.
Let me know if I can be of more help.
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending
Question Unanswered
How Can IT Teams Detect Hardware Bottlenecks in Business Networks?
0 helpful
0 replies
Question Locked
Using multi-NIC setup for NAS + router — better than VLAN?
0 helpful
4 replies
0 helpful
5 replies
Question Locked
Unknown device connected to my network
0 helpful
2 replies
Question Locked
How to change public IP without ISP?
0 helpful
2 replies