Question Locked

Cisco aironet 1130ag ios

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

hi,

I had a problem with a Cisco aironet 1130ag access point. I couldn't delete the radius server settings, so I decided to erase nvram, copy run start/start run and reset. This didn't wipe the config so I deleted to delete flash thinking it would wipe the config, but it seems to have wiped the ios.

WhLen I boot the AP and connect via hyperterminal I get an "ap:" prompt and a restricted set of commands.

Any help on getting the working ios back would be much appreciated.

Thanks.

2 replies

by largeinnit

use the following cmds to load tftp img

ap: copy tftp://138.50.225.9/c1130-k9w7-mx.124-3g.JA1 flash:c1130.JA1

ap:set IP_ADDR 138.50.156.143
set NETMASK 255.255.255.192
set DEFAULT_ROuter 138.50.156.192

boot flash:c1130.JA1

This discussion is closed to new replies.