Question Locked

Cisco ASA remote access VPN

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I had configured cisco ASA 5510 for the remote user to dial through the internet facing interface. The users once dialed in should be able to connect to the servers at another location through am MPLS interface. The internal network users are PATTED to the MPLS interface to access the remote network. while the internal users are able to access the remote network while patted, the dial in vpn users are note been able to connect to the same servers while dialed in. Is there any way to do this.
I had enabled same-security-intra/inter
and nat traversal is also enabled.
Please help

2 replies

by jkofinas

I know with the cisco client you have the option to denny/allow access to specific hosts and or networks.

You can configure that under the remote vpn groups. Either with split tunneling or just plain and simple firewall rules.

This discussion is closed to new replies.