Question Locked

Cisco Router monitoring

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi everyone.i manage a network with about 200 cisco routers deployed.is there a way of confirming and/or receiving an alert when any of the remote routers is powered on/off? are there cisco functionalities for achieving this?is there a monitoring software that can achieve this?
i will appreciate any suggestion.thank you.

9 replies

by fregeus

There are a lot of choices out there, you primary restriction is your budget.

If you don't have any or not a lot, i would get a monitoring software like Nagios or Whats up. Couple that with a syslog application and you're cooking.

If you have more budget, then i would get something that uses SNMP to get more information. I like Solarwinds myself.

GL

TCB

by Former member

MRTG (free), CiscoWorks, Big Brother (free) and tons of other open-source apps. You need a *ix machine though.

by aoladipo

thanks for the reply.at the moment i am using whatsup gold to monitor link availability and i have a syslog pc.however,what i want now is a tool/system that can conclusively show that the reason for unavailability of the links during those periods they go down is loss of power supply (which happens from time to time in my environment)
thanx!

by fregeus

I'm not sure such a precise system exist, but you would definitely like a SNMP monitoring system.

I recommend doing a search on the net for SNMP systems. Be warned though, those systems tend to be expensive. Worth the money, but expensive.

TCB

by scott_heath

I use Solarwinds and it's not to terribly expensive. If you have 200 routers I would think a few grand to monitor them shouldn't vbe out of the question.

The SNMP software can't tell you there was a power outage, but it will tell you the unit was rebooted. It has no idea if the power was turned off via the switch, you pulled the plug, someone accidentally stepped on the power strip switch, or if the entire eastern seaboard had a power outage. But at least you'll know there was some sort of power loss at the site, versus just a sudden loss of communications.

by scott_heath

SolarWinds myself. Cost you a few grand for 200 nodes though.

by davemarriage

Just do a search for IP monitors or ping monitors. IP monitors generally have more options. Most of the monitors you can download and use their 30 day trial to test what you like best.

by aoladipo

thanks everyone.
i am googling ip monitors and i intend to also check out the solarwinds options as suggested by scott.
i look forward to posting a note on this when it's all done.

This discussion is closed to new replies.