Question Locked

Cisco Routing with 2 Firewalls

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I'm trying to determine how I can utilize my 2 internet circuits and 2 firewalls during an ISP migration...

What I WANT to be able to do is selectively have a route that sends all traffic from 10.1.1.0/24 out firewall 10.0.1.2, and have traffic from 10.1.2.0/24 go out firewall 10.0.1.3.

Obviously, I can't do this with 'ip route' - but is there some other way to do this?

I'm using a 3750-24G as my core switch/internetwork router.

3 replies

by cg it

selectively route means what?

you want to be able to choose when?

by kingmoocow

Sorry, selectively used in bad context.

I don't want them dynamic or anything, I just want to be able to select which subnets in my office will be routed to which firewall. For Example, I want my Dev/Production team to be able to use the faster circuit, while the people that putz on the web get the crusty T1.

Essentially, I want the ip route command to work like this:
ip route - but, of course, it doesn't.

This discussion is closed to new replies.