Question Locked

Cisco VLAN and Windows 2003 DHCP help

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Can anyone give me some tips or point me to some documentation on setting up a catalyst 4500 series w vlans and a windows 2003 server w associated dhcp scopes? Just for curiosity, what is a good vlan design for a college. I was thinking a student, a staff, a faculty, and a guest and or mgmt vlan. Also, on the guest vlan how would I setup an outbound acl to only allow port 80 traffic? Thanks in advance.

4 replies

by triathlete1981

a link to the catalyst 4500 switch series:

http://www.cisco.com/en/US/products/hw/switches/ps4324/prod_models_home.html

setup is a little complicated for a forum where we can't actually look at your network. also, why not add port 443 to the guest? if someone's checking their credit card balance or something similar, you'd want to add that.

first you have to think about how you're going to subnet your network and then apply the vlan's appropriately. your best bet is to use one switch per vlan if you're talking about a college and then configure your router subinterfaces, which you'd have to do regardless. and i say one switch per vlan b/c i'm assuming with a college, you'll be having more than one switch.

if the 4500 is coming off your router and is closer to the core layer (cisco network model), then you could set up one switchport per vlan and not have to worry about much more configuration aside from setting up subinterfaces on your router. assuming you have a cisco router?

by hops33n

Thanks for the info. That should help out.

This discussion is closed to new replies.