Networks

Ask something
Discussion Locked

Cisco VPN Client

0 helpful
1 reply

by limiller

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am trying to set up Cisco VPN client V 4.0.1D to access a Win2K network behind a Cisco PIX 506. The Client is running on both Win2k and XP workstations. Am able to connect to the PIX but cannot get a logon prompt from the network. This is true even with running the windows logon first. Seems to be a conundrum: Can't join the remote network because I cannot control how to get thru the network LAN adapter. HELP.

1 reply

by blueknight

I had a very similar problem, only with Nortel's Extranet Client. Turns out the PIX was allowing me to contact the remote end, but it didn't allow the inbound acknowlegement to come back to me. You might check to see that your PIX will allow the return handshake.

Never had a problem with my Cisco VPN which is the one I use most frequently. This is probably because we've used it for so long, we've overcome any problems with it.

This discussion is closed to new replies.