Networks

Ask something
Question Locked

Cisco VPN for VISTA

0 helpful
14 replies

by arun 1 view

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,

I want to download Cisco VPN for Vista. Can anoyone help?

Thanks
Arun

14 replies

by hal 9000

However you could try M$ Windows Vista Community located here

http://tinyurl.com/yt8adb

Personally I haven't been quite insane enough to place an untested and unsupported OS into any Business Environment where losses in production can easily exceed the cost of the hardware package in a few minutes of down time.

I'm not sure just what the quality of the answers will be at the Vista Community as by the looks of things it's end users attempting to support other end users but it's got to be much cheaper than ringing M$ Technical Support only to be told to contact Cisco and be charged an arm and a leg for that obvious bit of information.

Col

by shamdeepak

Hi

You can download the Cisco VPN v4.8.01.0300 for VISTA from cisco's website but you need to have a valid CCO login.

The Cisco VPN client beta works with Vista but has issues.Cisco VPN Client does not support VPN start before logon, uninstall warns that VPN service is still running.

Hope this helps.

by arun

Thanks ! But I dont have a CCO login. Any other alternative? Also I was searching around and found some beta 5 ver is released. Any suggestions on this ?

Thanks again
-Arun

by arun

Hi ,
Thanks a lot for the link. I installed andf itd working perfect. I had few issues which was solved.

After downloading I checked for Xp pro Service pack 2 compatibility test with Vista. After installing :

Computer 1: I received Error 402 . I googled and this link helped https://www.techrepublic.com.com/5208-6230-0.html?forumID=101&threadID=212465&messageID=2180531
Everything worked perfect here.

Computer 2 : Its working perfect but gives gives driver error every time when I try to connect. Slightly slower but works perfect when connected remotely as well for all purposes.

I hope if anyone come across same error the above may help.

Thanks a lot Shyam,

by ballj_35

Can anyone let me know the link to download the Cisco VPN for Vista and anything else I need to have in place to install and run?
Thanx in advance.

Jerome

by ballj_35

Can anyone let me know the link to download the Cisco VPN for Vista and anything else I need to have in place to install and run?
Thanx in advance. send email to ballj_35@yahoo.com.

Jerome

by fh2level

How did you log in to downlaod from that site?

by hassmirza

Hi Arun,

How did you log into that site ? Could you pls provide the login details or another site where a free download is available for the cisco vpn client for vista. Many Thanks.

Regards

Hassib

by shamdeepak

Hi,

Please let mek now what could be th epossible causes for a slow VPN connection in case of Remote Access VPN.

by bssplayr

Using Vista Business, and Cisco VPN client 5.0.00.0340. I've had varying degrees of success, ranging from the VPN showing as 'connected,' but being unable to ping anything on the remote network, to having the VPN client unable to connect, giving an error message immediately after clicking 'connect.' Any suggestions?

by arun

If you get a error immediately its possible that some security features are blocking( possibly as firewall) .
Remove the software and restart and then install it again under compatibility mode. It should work.

This discussion is closed to new replies.