8 replies
by jeff Accepted solution
by Member 30634329 Accepted solution
by rkuhn040172 Accepted solution
by jeff Accepted solution
by Member 30634329 Accepted solution
Well if you have "disabled" (stopped services I assume) DHCP and RAS on your server and your laptop is still "pulling" an IP address (you released and renewed I assume), and there is no other hardware involved....
I noticed one of the IP addresses that are being assigned to your client is not in your DHCP scope. If you are running wireless, could there be another unsecured wireless network nearby that you are unknowingly connecting to?
by alphatech9 Accepted solution
I disable DHCP on the server, but the router was pulling in a IP from the ISP. the IPs coming back were like 74.112.23.XX but the scope in the server and router were both 192.168.x.x.
This is common for a laptop to show a different IP than what is configured in the server.
by bart777 Accepted solution
From a machine that is getting this address, run an IPCONFIG /release and renew.
Once you've done that then do an IPCONFIG /ALL. This should show you the address of the DHCP server that is handing out the address. From there you should be able to kill it.
Good hunting.
by jeff Accepted solution
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending