Question Locked

Clients lose connection to server.

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am new to the networking field. I have about 200 clients running XP on a Windows 2003 Server. About every ten to fifteen minutes all machines lose their connection to the server. Any ideas on what would cause this? Would a bad switch cause everything to drop?

6 replies

by triathlete1981

that's a lot to handle for someone new. i hope you have help. that's a lot to handle for any one, no matter what experience. and if someone says differently, they're lying.

is it just the connection to the server they're losing? is it one server, or are they losing connection to the domain?

it could be a bad switch. if it's one particular server that's a problem (and not kicking people off the domain), you could try updating the driver for the server NIC or replacing the server NIC completely.

if this is a domain controller, you should install a second NIC anyway for fault tolerance in case one NIC on the server does go bad.

by jplconsultant

I guess there's no better way to learn than via total immersion.

Best of luck to you, Radish31! We'll help you as/when you need it.

JPL()

by jplconsultant

You may also check your licenses. Make sure you've got enough and the right kind (per device vs per user).

Is this a domain controller? As mentioned already, knowing whether the machines are losing connection to the domain, the server or the network as a whole, will help in focusing the troubleshooting.

Here's a thought: I think 200 machines is a lot for one server to handle. A company that big should be able to afford at least one more server for load balancing or distribution of services. Depending on what the server does, it may handle 200 clients OK, but can you handle 200 people when the server dies? (YIKES!)

JPL()

by radish31

You can say I'm in over my head. I actually work for a school district. There are two servers at the high school and one server at each of the three elementary schools. My problem was at the high school. I was not able to see any thing... I had no connection to anything, it was as if I was unplugged. Any way that problem went away, but I'm thinking that it could be a bad NIC and that person just hasn't been there the last couple of days.

by jplconsultant

It certainly could be a bad NIC.

For the record, I think you've got a lot to handle with 200 machines and being new to the field. It's not a bad thing, though. There's no better way to learn than through total immersion. You're doing right to meet this head-on and ask for help when you need it. You'll learn more just in fixing this one issue than you'll learn through reading books.

Good on you, man! Keep it up.

JPL()

This discussion is closed to new replies.