Question Locked

Clone a MAC address on Cisco ASA 5505

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,

I've been trying to clone the MAC address of the
Vlan 2 interface of the Cisco ASA 5505 to match the MAC address of the existing Nortel, so that i get the same ip address from the ISP DHCP server.

All i did was
#Interface vlan 2
#mac address [Mac Address]

when i do the show interface command for Vlan 2
i do see the new MAC but when i plugged in the
cisco after doing the DHCP release on the Nortel
and power off both the Nortel and the cable modem.I am getting a diffrent IP even though our ISP has reserved that IP to MAC.

Am i cloning the MAC right on ASA ?
Please advice.

3 replies

by robo_dev

that would tell you what the cable modem sees.

What type/brand cable modem?

Most of these have a 192.168.100.1 and something complicated like root/admin to login.

by aminder.boparai

I can certainly try that. But my ISP see the request coming from the same MAC address when i plug in the Cisco . But there DHCP server still
issues a different IP.

I just wanted to make sure that is this the right way to clone a MAC on cisco or do i need to do something else.

This discussion is closed to new replies.