Question Locked

Cloning the wrong Hard drive

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
i recently did a cloning of my old hard drive 80GB to new 80GB HDD so i can upgrade my pc to Vista. after cloning with Norton Ghost, i realised that i clone the new HDD to the old one and i lost all my data,especially my MYOB data and i'm really desperate to recover all my data from the old HDD back. Please any smartway to get it back, i desperately need those data and i need your help

5 replies

by the scummy one

did you at least back it up before you cloned it?
If not -- oops! You should always be certain backups are in place before making modifications such as this.

If it was not backed up, you can make it worse by using the wrong utility to try to recover it. If the data is truly needed, I would suggest taking it o a data recovery service. There are many around and they have the best equipment for this kind of thing. However, it will cost quite a bit, but it IS your safest choice.

If the data is wanted, but not dire to have, I am sure someone here has a good utility that they have used for this. I havent used one in some time, nor have I needed one in a while, so I will leave SW tools for others here.

by captbilly1eye

DO NOT install anything on the effected drive and avoid powering it up any more than you have to. Any further writing to it or defragging which occurs during a normal boot process will lessen your chances of recovery even more.

Although I have never cloned a drive in the way you described, I have run across several drives that were erased or reformatted where I was able to recover the majority of the data. I haven't found one utility that works best in all circumstances, but here are a few that have helped in the past:

The one I've had the most success with over the years is Stellar Phoenix File Recovery -
http://tinyurl.com/6ncpfs

Another that has worked is Disk Doctors Windows Data Recovery - http://tinyurl.com/675hll

A third one I've used successfully with USB memory sticks but I understand it is good for HDDs as well is Smart Data Recovery - http://tinyurl.com/2kcsmm

Although they are not free, they each have trial versions that will at least freely tell you if the program can indeed salvage anything.

However, I agree with TheScummyOne in that there is not a lot of hope since reformatting the drive typically wipes it virtually clean. At best you may be able to salvage some documents, files or databases. If the above tools can't recover what you are looking for, your only chance may be to contact a data recovery service of which there are plenty found on-line. But if you think the above products are expensive, make sure you are sitting down when you get a quote.
It all depends, I suppose, just how valuable the lost data is.

[b]Good Luck![/b]

.

by techienate

From my experience doing data recovery at a couple of computer shops, the best program I have used is Get Data Back for NTFS or Get Data Back for Fat (depending on the filesystem on the hd), available from runtime software at http://www.runtime.org/ . You can use the trial to see how much data it can actually recover before paying for the program. (If the source drive for the clone was blank, you will probably be able to get most of it back, but I make no guarantees :) .) To use this program for data recovery, you probably want to install it on a different computer and then plug the hd that needs the data recovered into that computer. I can't give you all the instructions here, but carefully read and follow the directions for the software. (Instructions are mostly on their website, i think.) Anyway, the software looks basic but works excellently. You can get it at: http://www.runtime.org/

by oh smeg

And that was where a Business owner Cloned a Blank External HDD to his NB's HDD with a version of Ghost.

As he had backup's of the drive I didn't even bother trying to recover anything off the drive as I didn't have the time to waste he needed his NB back up & running so he could work. OH he also tried to get me to do it free as well because I was the one who supplied the NB and the Software so it was my fault I sold him what he ordered. :D

Anyway if you don't have a Backup of your MYOB Folder you should remove the drive from use Immediately fit it to a external Caddy and then look at some of the available Data Recovery Applications that are available.

If this is Critical Data without a Backup available I wouldn't even advise attempting to do anything at all with the drive except sending it to a Data Recovery House capable of doing Forensic Recovery. It's not cheap but as the drive is still working it's not overly expensive either but do not expect to recover the Data for a few $ it's going to cost you money and a bit of it.

If the data is just nice to have back you can use one of these applications to attempt to recover the Data but there are some things you need to first understand. [b]Never[/b] write to a drive incorrectly formatted or otherwise deleted as you make it harder to recover anything off it. When you are running a Data Recovery Application [b]Do Not[/b] save anything to the affected drive use the affected drive to scan and save the output from the recovery application to a different HDD at least 3 times the size of the affected HDD. You may not need the room but you just as well may. Data Recover software can recover fragments of data and this can take a lot of room/HDD space.

If you mess with something critical and can not get what is wanted it's going to cost you more when you take it to a Professional Data Recovery Place as they have to work harder for longer to undo what you have done attempting to recover from this.

There are only 2 kinds of computer users those who have lost all of their Data and those who are going to loose all of their data so the steps that you take prior to this happening can save you a lot of time & money.

Here is a short list of the better Data Recovery Applications available

http://tinyurl.com/273ay5

http://tinyurl.com/rmvrv

http://tinyurl.com/yvrsl

http://tinyurl.com/yyk8cm

http://tinyurl.com/382vm

http://tinyurl.com/ynwnel

http://tinyurl.com/nc4kx

http://tinyurl.com/2wox7l

http://tinyurl.com/374d8b

http://tinyurl.com/djw6u

http://tinyurl.com/f73se

http://tinyurl.com/8bd3f

http://tinyurl.com/afu2j

While the last 2 are from the same company they are very different products. Win Hex should only be considered for use by someone who knows Hex Inside Out while Davory is a great cheap General Purpose Application.

Personally I prefer the On Track Option but it's anything but cheap. However because I use this type of software a lot it's paid for itself many times over by now, for a cheaper option Spin Rite from Gibson Research or Stella have both very good reputations by other TR members.

Just one thing here though as Ghost writes Block by Block it requires something better that a Partition Information Rebuild which is used when a drive has been formatted. The Format only writes to every third sector where as Ghost overwrites it all. So you need a Forensic Recovery Application here not one of the light weight cheap programs. So expect to be looking at a lot of money for the software initially something like Davory isn't going to work anywhere near as well as it otherwise would on a mistaken format.

Col

This discussion is closed to new replies.