Question Locked

Compaq Deskpro 2000 5166MMX BIOS Problem

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

While running the BIOS upgrade SP15803.exe
I get a error that said. Either there are no valid driver on the diskette or there are no upgradable devices in the system. I know the the BIOS is down level because it will not let me install a drive greater then 8GB.

on System info screen it should have the bios info bios version/date but i get unknown, 06/25/1997

I still cannot get the BIOS to upgrade.
I have tryed have everthing that has been
suggestion, but No luck getting the BIOS to update.

SOFTPAQ NUMBER: SP15803
PART NUMBER: 223593-401
FILE NAME: N/A
TITLE: ROMPaq for Compaq Deskpro 2000 Pentium Pro Models (586C2 ROM)
VERSION: 5C2_0601.99
LANGUAGE: English
CATEGORY: ROMPaqs
PRODUCTS AFFECTED: DeskPro 2000 Pentium Pro models,
including 6180 and 6200
OPERATING SYSTEM: N/A
SYSTEM CONFIGURATION: N/A
EFFECTIVE DATE: November 30, 2000
SOFTPAQ UTILITY VERSION: 2.x
ELECTRONIC DISTRIBUTION ALLOWED: Yes

SUPERSEDES: SP7979
DESCRIPTION: This creates a ROMPaq firmware upgrade diskette to
upgrade the System ROM in the above-mentioned Deskpro 2000 Pentium
Pro models (586C2 ROM Family). The ROM Family and ROM date can be
determined by running F10 Setup.
Enhancements/Fixes:
- Updates System ROM to Version 5C2_0601.99.
- Allows system to recognize hard drives larger than 8 GB.

HOW TO USE:
1. Obtain a formatted 1.44 MB diskette.
2. Download the SoftPaq to a directory on your hard drive and
change to that directory. The file that is downloaded is
SP5329.EXE.
3. From that drive and directory, execute the SoftPaq file:
SP15803 [ENTER]
You will be prompted to place the formatted 1.44 MB diskette into
a diskette drive to create the diskette.
4. After the diskette is created, you may delete the downloaded
file SP15803.EXE if you wish.
5. Keeping the newly created diskette in the A: drive, cycle
system power to boot from the ROMPaq diskette.
6. Follow the on-screen instructions to select the 5C2_0601.99
Compaq System ROM and flash the firmware.

Copyright 2000, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.

These are the directions I have been using.

12 replies

by kbostelman

on System info screen it should have the bios info bios version/date but i get unknown, 06/25/1997

by oh smeg

Every Computer has it's limits and new BIOS Code is a lot bigger than the Older Code. With older M'Boards the BIOS has stopped being developed so if you have the newest available for that M'Board that is all you can do. A 8 GIG Upper Limit was a Enormous Drive Capacity once. I can remember buying IDE Controller Cards to add HDD's to a system that could use up to a 4 GIG HDD and at the time there where no 4 GIG Drives available for any price. For that matter I can remember buying HDD's that where the biggest available and they where 50 MEG in capacity. I still have a few of those here though I'm not sure what they are good for now other than Paper Weights. ;)

With a system this old a 8 GIG HDD would have been unaffordable once and from what I can see these came with at best something like a 1.2 GIG Capacity on the HDD new. According to HP the newest available BIOS is listed here

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=96780&prodTypeId=12454&prodSeriesId=96252&swLang=8&taskId=135&swEnvOID=14#120

as 586C2 ROM.

Col

by kbostelman

While running the BIOS upgrade SP15803.exe
I get a error that said. Either there are no valid driver on the diskette or there are no upgradable devices in the system.
On System info screen it should have the bios info bios version/date, but I get unknown, 06/25/1997

by kbostelman

Can I force BIOS upgrade or clear it then be able to load the BIOS upgrade or highest level to the P.C.

by seanferd

install it on removable media, right? Drop that EXE on your desktop, double-click it, and follow the instructions.

by kbostelman

yes I did all THat but I got this

While running the BIOS upgrade SP15803.exe
I get a error that said. Either there are no valid driver on the diskette or there are no upgradable devices in the system.
On System info screen it should have the bios info bios version/date, but I get unknown, 06/25/1997

by oh smeg

From a DOS Prompt not from within Windows.

Copy the Flash Utility which is a EXE File and the Data File which can be almost anything but a EXE File and then using a DOS Boot Disc you boot the system till you get the A: Prompt and then change the Floppy over to the one with the Flash Utility and Data File then type in DIR/w and press Enter.

This will give you a display of the files on the Floppy which you then need to make a note of the Data File and type in the Exe Files Name and then press Enter. At some point during the Flash Procedure you will be prompted with [b]Do you Want to Save the Old BIOS[/b] which you should accept and save to the same Floppy as you are using to Flash the BIOS From but with a Different Name to the New Data File that you are going to use to overwrite the BIOS with. When prompted for the new File you should enter the Data Files Name and press Enter.

Or you may need to enter the EXE Files name followed by the Data Files Name and some Switches which tell the computer what you want to do which can be to save the old BIOS overwrite it or whatever. You need to read the instructions in the M'Boards Book/User Manual or on HP's Web Site.

Col

by kbostelman

I still cannot get the BIOS to upgrade.
I have tryed have everthing that has been
suggestion, but No luck getting the BIOS to update.

This discussion is closed to new replies.