Question Locked

Compaq Presario Hard Drive(s) Problem

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I've recently purchased a Compaq Presario 5000 with a dinky hard drive, which has a C drive and a D drive configuration. I added an 80 gig hard drive from my (broken) family computer, and it was recognized with no problem.

However, despite the added space I keep getting a message that say's the D drive is full. I've run clean-up software and defragged the D drive, but there are files in there that I'm loathe to erase.

I want the computer to recognize the 80 gig hard drive as the main drive, or to recognize all of the space available, equally, and, I want to eliminate the bottleneck created by the D drive issue.

Any thoughts?

2 replies

by Former member

Clarifications

by oh smeg

If you have Added another HDD it must be the D or Higher Partition/Drive it can not be the C or Boot Drive.

However if you wish to use the Drive you have added as the Main Boot Drive it's really easy to do all you need do is remove the Original HDD and install the OS to the replacement HDD. You can then refit the original HDD as a Slave and copy your Data off it till you have everything copied over.

Then if you wish you can wipe or just Format the original Drive and move things to it from either Windows Explorer or My Computer. Though you [b]Can Not[/b] move any files that are related to the Operating System to the second HDD that way only Data. If required you can move the Page/Swap File to the second Drive but depending on which version of Windows you have the directions are different.

Of alternatively you could wipe and reformat the drive you have added to this computer and then move the Files like My Documents to it.

Col

This discussion is closed to new replies.