Question Locked

compaq will not start

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a compaq desk top snd will not start
when I turn it on all I get is the compaq start screen. I have tried pressing Esc on start to start boot but nothing happens the same when I press F1 to start set up and F10 to start Recovery can any body help me

3 replies

by hal 9000

The computer is still working but what you need to do now is enter the BIOS and see if the unit is able to see the HDD. If it is then the Partition has most likely become corrupt and is preventing the system from Booting.

If the BIOS can not see the HDD it has either become disconnected or it has failed totally. If it's the first it's an easy fix as all you need do is open the side cover and push in the Data & Power Leads and it should work.

However if the HDD has failed you'll need to replace it and install from your recovery CD's and then pickup your data from your most recent Backup to be back where you where prior to the HDD Failing.

If you have some data on the HDD that you simply [b]Must Have[/b] your only option here is to take the drive to a Data recovery House and get then to recover the data. If the drive is dead this is going to be very expensive so ask for a guestimation before allowing them to proceed with the recovery. Also some Data Recovery Houses charge a Quote Fee so ask about this as well before you commit yourself to leaving the HDD with them.

Col

by ganeshsai2007

He is telling that he is able to press F1 & F10 it is performing its particular function. Let him tri F8 and after that Escape who knows there may be problem with the escape button?

I am just guessing If I am not wrong. Please take it as a suggestion for possiblity.

Thanks,
Ganesh

This discussion is closed to new replies.