Question Locked

Computers missing in Network or My Network Places

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have about 20 machines on my network. Yesterday I noticed on my Vista Business machine that when I open the Network window the only machines that show up on it is my computer along with my partners Vista machine. All other computers and servers are no longer listed. I can ping them. All of my mapped drives are working fine. They are just not listed in the Network window. I thought it might just be my machine but I am finding out that it is network wide. What do I do to correct this???

3 replies

by rob miners

Check that File and Print Sharing is enabled on the PC's. Check your Firewall settings.

Ensure all the necessary File & Printer Sharing ports are open on all routers/firewalls between the local and remote machines, and in any type of firewall software on the remote machine. In Vista turn off Network Discovery and then turn it back on.

Confirm that the Operating System (O/S) is properly configured with regard to Names Resolution.

Click Start, click Control Panel

Click Network Connections.

Right-click "Local Area Connection", and then click "Properties".

Click on (highlight) "Internet Protocol (TCP/IP)", and then click "Properties" button

Click the General tab, and then click "Advanced" button , bottom right.

Click the WINS tab.

Under "NetBIOS setting" section, click Enable NetBIOS over TCP/IP, and then click OK two times, then "close".

( ) Default

(*) Enable NetBios

( ) Disable NetBios

Keep us informed as to your progress if you require further assistance.

If you think that any of the posts that have been made by all TR Members, have solved or contributed to solving the problem, please Mark them as Helpful so that others may benefit from the outcome. ;) :D

This discussion is closed to new replies.