Question Locked

Configure CISCO 1841 router for RDC 3389 port

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi TechRepublic friends

I am trying to configure CISCO 1841 router for remote desktop connection (port no 3389). I understand, this can be done through port forwarding.

What I like to achieve: Nat is being enabled on the router. One of the server on the LAN by ip 192.168.1.xx has to be accessed from outside the office for maintenance purpose.

- There is no BVI interface configured in the router. ip nat inside source static tcp 172.16.2.60 3389 interface BVI1 3389. In this scenario, how do I enable BVI interface.

- Can this be achieved through ACL, something like this. access-list 101 permit udp any host eq 3389 log
access-list 101 deny ip any any

Please advise me through sample config:

Thanks & regards

MRM

2 replies

by bsayres

Did you figure this out? It is real easy couple ways to do it.

This discussion is closed to new replies.