Question Locked

Configuring my NICs

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Ok, first - I apologize if my questions have been asked and answered by someone else, although I've looked and looked and couldn't quite find what I was looking for.

Server 2K3 is set up as local domain (company.local). Machine has 2 NICs. #1 is receiving IP from my cable modem. I've set up 2K3 as a DHCP server (scoped as 10.10.xx.xx addy's) and intend to have my other PCs on the domain and travel through the server for files/printing and to reach outside. I want to hook my wireless router to NIC #2 in order to grab the 10.10's. How do I configure NIC #2 to actually issue the IP addresses to the router (DHCP has been turned off @ the router btw) so that when plugged into the router, clients can get outside??? Also, is it possible to control multiple NICs in one machine to assign "outgoing" or "incoming" connections?

Thanks for the help!

2 replies

by dooj

No idea re controlling nic traffic direction like that, but as far as your wireless router goes, DHCP on the server should issue addresses to requests on NIC#2. Manually assign NIC#2's IP if you haven't already. In DHCP console, check NIC#2 is the interface that DHCP service is serving(!) I'd also use DHCP mmc snap-in to make sure that it is the IP of NIC#2 that's being specified as the default gateway/router. Connecting this to a LAN port on the wireless router should treat it as a switch, with wireless clients connecting to the built in AP similarly able to receive DHCP leases from server.

This discussion is closed to new replies.