Question Locked

connecting 7 computers to a four port router

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

i have a 4 port linksis router all 4 are full i have 2 dlink routers and a linksis hub. i can get the 2 routers to work and get all computers on the net but i cant file share between the routers. should i use the hub or is the router able to do this or how do i set this up to get it to work..
help me please
thanks

4 replies

by mjd420nova

The only way I could really get my setup to work was to dump it all and get a WIFI router, it would support 4 wired and 4 wireless ports, then all I had to do was install wireless cards in two machine and it worked perfectly, I even had an open wireless port for the addition of the PS3 machine my son bought.

by cg it

get a 8 port switch with an uplink.

connect ALL computers to the 8 port switch. Uplink from the switch to the router [requires a X-over cable on the uplink port if it's a seperate port. Straight thru cable if you use a switch port].

now you'll have all computers on the same network [routers create networks] and free up 3 ports on the perimeter router.

by ananthu.it

You need to make your d-link router to act as a switch so this can be done by making lan-lan cascading if u been intrested please mail me my mail id is ananthu.it@gmail.com,I will fix this problem and please say the exact network setup it would be helpful for me

This discussion is closed to new replies.