Question Locked

Connecting a Digital Video Surveillance machine to a laptop wirelessly.

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am going to try to make this as simple as possible.

One DVR machine (A)with networking capabilites will try to be accessed remotely on a laptop (B)wirelessly. Now, there is distance between point A and B, no phone lines, no power, no internet, nothing. The location this DVR will be installed is in the middle of nowhere, and power will be obtained through solar power. Now, i am told that I will need a wireless bridge that will connect to the DVR at point A, and a wireless router connected to the laptop at point B. Linksys routers and bridges will be used. The final goal is to be able to access the DVR remotely to view camera footage, using the laptop at Point B. This is done by means of our remote viewing software, which requires us to log in to the DVR using the router IP where the DVR is located. But, if there is only a bridge present in that location, what IP would we use??

How can we without a doubt make a wireless connection between the two machines in order to log in?

My wireless networking skills are very limited, any help is appreciated. Thanks.

10 replies

by older mycroft

THAT is rather important for the answer.

For example "in the middle of nowhere" - how big is 'nowhere'?

How far away from the outer edge of 'nowhere' will the wireless laptop be?

by jamesrl

If you are talking about truly the middle of nowhere, then WiFi which is limited to hundreds of yards, will not be enough.

Your best bet will be satellite, but it won't be cheap.

Will you be watching only recordings? Or will you be streaming "live" video as well.

As for the equipment, most satellite providers will recommend some.

Not sure why your laptop has to be wireless unless it is close enough to be on the same net as the DVR.

James

by jeff johnson

It is about 30 ft or so, so i dont think it will require satellite.

by jamesrl

You said the middle of nowhere and no access to power, internet, anything. You could have been more clear.

30 feet is extension cord distance.

I assume you need something discreet so no wires. I don't know how your DVR connects wirelessly - you mention a bridge, but a brdige to what? One wireless router is all you need to connect the laptop and the DVR.

James

by jeff johnson

Well, this setup is for a client who basically will install cameras all over his shed, and warehouse. So, the camera cables will cover a great distance and be set up on poles. So being spotted is not an issue, since this network will only be used by one customer who owns this land. Basically, our customer will use the laptop from time to time to view the cameras live footage. We just go in there and set up the network so he can remotely connect.

by jeff johnson

Sorry about that I could have been more clear.

The DVR will be located in one building, and the laptop in another. So you see the trouble the tech guy that is going down there might encounter, he might be drilling holes to run cables through the walls all day. I think that is why he is trying to do this wirelessly.

This discussion is closed to new replies.