Connecting modem to modem
Hi. This is the scenerio...i've got two pcs with only internal modems installed. I want to connect the two pcs so i can transfer files between them. How do i got about it?
THanks.
IT Employment
Hi. This is the scenerio...i've got two pcs with only internal modems installed. I want to connect the two pcs so i can transfer files between them. How do i got about it?
THanks.
by lordcryonax
by gralfus
You will still need to have two phone numbers so you can dial between the modems. There is no way to make the modems talk outside of a phone connection, because they will detect no dialtone.
If you can install a NIC in each PC, you can hook up the two PCs with a crossover cable.
by guruofdos
It will work between two extensions on a PABX. It is also perfectly possible to set Dial Up Networking to not wait for a dial tone. Any single digit can then be used to 'dial out', but linking the two modems together RJ11 to RJ11 will only work with certain types of modem (Conexant HSP's work ok in this instance!) as the modems usually need an AC voltage on the line to drive the line interface components.
The easiest way to link the two PCs is with a 3 wire serial null modem cable and then use Direct Cable Connection to network them. Slow, painfully slow, but cheap and simple!
by guruofdos
It will work between two extensions on a PABX. It is also perfectly possible to set Dial Up Networking to not wait for a dial tone. Any single digit can then be used to 'dial out', but linking the two modems together RJ11 to RJ11 will only work with certain types of modem (Conexant HSP's work ok in this instance!) as the modems usually need an AC voltage on the line to drive the line interface components.
The easiest way to link the two PCs is with a 3 wire serial null modem cable and then use Direct Cable Connection to network them. Slow, painfully slow, but cheap and simple!
This discussion is closed to new replies.
Sort by Trending