Question Locked

Connecting T1 Line to Network

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a customer that has a T1 Line connected to a switch, but no one can get on line.
1 SBS 2003 server and 10 workstations.

How do you set this up.. do i need a router?

4 replies

by cg it

think about the problem. The ISP provides a public address, default gateway, and DNS servers to use to obtain internet access. How are the SBS box and clients going to have internet access?

If you don't know anything about SBS 2003, you shouldn't be trying to set it up. Get the Microsoft Press Small Business Server 2003 Administrators companion book, read it, and after that, you'll have a better understanding of how to connect the SBS network to the internet.

by labrat636

All you said was that it was connected to a switch.
Connected how? What kind of switch? More info helps us help you.

by sgt_shultz

yep, you'll need a router alrighty. but it would be weird if it wasn't already set up.
can ANYBODY there get out on the internet? and can you do ipconfig /all from that box? or from a non-working box and post the results?
is the only thing not working internet access?
if so, imh experience look for misconfigured dns. prove dns is the problem by reaching a website by it's ip address (i always use www.nfl.com it is at 64.30.256.34
if you can reach the site by typing in the ip address instead of the url then you have a dns problem. i would research 'no internet' under sbs2003 at support.microsoft.com and happy learning.
if this is relatively new install you might have free support phone support from microsoft. it is worth a try...

This discussion is closed to new replies.