Discussion Locked

Connecting to office PC with pcAnywhere

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Need assistance with connecting thru linksys 4 port cable/dsl router over the internet from home using pcAnywhere V10.5.

Have used settings for Router and pcAnywhere as recommended by both support web sites but nothing seems to work. Get cannot find host error message. I can successfully at connecting from with the office LAN.

Any help appreciated.

10 replies

by ann777

The below is from www.Symantec.com :

Situation:
A pcAnywhere host does not appear on the TCP/IP browse list, or it shows a status of "unknown." However, you can ping the host. and those ping times are normal.

Solution:
The pcAnywhere use of IP ports changes with the version of pcAnywhere used. Earlier versions used ports 22 (UDP) and 65301 (TCP). These ports were not registered. Beginning with version 7.5, pcAnywhere uses the ports 5631 (TCP) and 5632 (UDP). These ports are registeredwith the Internet Assigned Numbers Authority (IANA). The following is a brief summary by version:

pcAnywhere 9.2 and pcAnywhere 10.x use ports 5631 and 5632 only.

pcANYWHERE32 8.0 and pcAnywhere 9.0 use ports 5631 and 5632, but it will fall back to 22 and 65301 if no hosts are found on 5631 or 5632.

pcANYWHERE32 7.5 uses ports 5631 and 5632.

pcANYWHERE32 7.0 uses ports 22 and 65301. A download file can change port usage to 5631 and 5632.

pcANYWHERE 2.0 uses ports 22 and 65301. With version 2.03 and higher, a download file can change port usage to 5631 and 5632.

... more ...

by ann777

How to make the changes

pcAnywhere 9.2, pcAnywhere 10.x
Compatibility with ports 22/65301 are removed with this version of pcAnywhere because port 22 is registered with the IANA for the Secure Shell (SSH). While it is possible to configure this version to use ports 22/65301, we recommend that you change the port usage on the older version of pcAnywhere using ports 22/65301.

NOTE: pcAnywhere 10.x will not connect with pcANYWHERE versions 5.x, or 2.x, regardless of the port assignments.
pcANYWHERE32 7.5
For information on how to change the ports that pcANYWHERE32 7.5 uses, please see the document How to change the pcAnywhere IP ports.

NOTE: You may not access hosts which are using both the registered and the unregistered ports without making the necessary changes.

pcANYWHERE32 7.0
Download and run the self-extracting Ports_70.exe file. The accompanying Readme.txt explains how to implement the update for this version of pcANYWHERE. This will change the ports to 5631/5632.

pcANYWHERE 2.0
Download and run the Ports_20.exe file. The accompanying Readme.txt explains how to implement the update for this version of pcANYWHERE. You will also make corrections to the Pcaw.ini file located in the \Windows folder.

...more...

by ann777

To modify the Pcaw.ini file on a Windows 95 computer:

1. Double-click My Computer.
2. Double-click the hard drive icon where Windows 95 is installed.
3. Double-click the folder where Windows 95 resides, usually C:\Windows.
4. Double-click the Pcaw.ini file.
5. Under the [pcANYWHERE] heading, add the following lines:
TCPIPDataPort=5631
TCPIPStatusPort=5632

To modify the Pcaw.ini file on a Windows 3.x computer:
1. Double-click Main.
2. Double-click File Manager.
3. Double-click the directory where Windows resides, usually C:\Windows.
4. Double-click the Pcaw.ini file.
5. Under the [pcANYWHERE] heading, add the following lines:
TCPIPDataPort=5631
TCPIPStatusPort=5632

This changes the ports to 5631/5632.

by ann777

From this comment:
I can successfully at connecting from with the office LAN.
It sounds as if there's one way connection, but not two-way?

Can you connect to home from Office LAN? If yes, then your home end is setup correctly.

Can you connect to Office from Home LAN? If yes, then your office LAN is setup correctly. I suspect this is where the answer is "No" -- and if this is the case, you need to look at the firewall/router, etc. on the Office end.

Make sure the Office end hasat least PC Anywhere 10.x in order to connect successfully with 10.5.
Make sure they have 5631 and 5632 opened on both TCP and UPD.

.... END

by rctech1

Anna777;

I have tried all you have recommended, which is basically everything the manuals by Linksys and pcAnwhere state.

I know it is the Linksys Cable/DSL router that is causing the block I just cannot figure out what or why.

Thanks

by administrator

I have Pcanywhere running over my wireless LAN gave me quite some problems setting it up with so many blocks and bridges in between. I tried Netsupport manager and it was voooooom!!!! no stress, and uses less resources over your network. try it (U can easily pass through proxies and firewalls .
netsupport-inc.com

by rctech1

Just wanted administrator and Anna77 to know that I have been successful at finally connecting. After the pain of getting all settings correct. The biggest burden is to have to know on a daily basis what the ISP assigned IP will be.

Thanks to all

This discussion is closed to new replies.