Discussion Locked

Connecting Win2K Pro. to WinXP Pro.

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a small network setup up as a peer-to-peer workgroup. Three machines on the network, 2-XP's and one Win2k. The IP addresses are set up as static addresses like 192.168.0.xx ('xx' is different on each machine), with the subnet of 255.255.255.0. The reason for the static IP's is the application running on these machines requires this addressing scheme. The problem I have is that the Win2k machine will not communication with the WinXP machines. The XP machines work fine between each other show the Win2k machine in network places, however, when you access the Win2k machine from the XP machine I get an access denied error. I have identical accounts set up in the XP machines. This only seems to be a problem when using static IP's so, what am I missing?

Thanks.

7 replies

by mongooch

I have the user account from the Win2k machine set up in the WinXP machines, but am not sure what you mean by setting up the Win2k machine as a user.

by martin

I know this is obvious but may of been over looked, is the w2k machine in the same workgroup as the xp machines?

by vlondek

I think that static IP not is a problem. Try to change configuration in Internet options for each pc - add IP adresses of your pc's in local intaranet. Check dafault gateway. (I supose you already has shared directories, has checked security tab under their properties and has seen that the users have sufficient rights.)

This discussion is closed to new replies.