Question Locked
0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I recently moved and can only use DSL and I'm not able to connect to the internet when routing through linksys wireless router although I don't have any problems connecting directly to the modem. Help please.
4 replies
by riveraccs Accepted solution
Clarifications
by cg it Accepted solution
if you hooked up your computer directly to your ISP via their modem [not router] then your ISP, in 99.9% of the time registered your computer's MAC address to their system. That means only that MAC address can connect to their system. So you have to clone your computers MAC address to your router. Your Linksys router's manual and the router's help has instructions on how to clone a MAC address
by sunny0075 Accepted solution
will u plz let me know that modem is set on bridge mode or PPPoe mode.
by oh smeg Accepted solution
When the Modem is working disconnect the computer from the modem and plug the CAT Cable into the Uplink port of the WiFi Router.
Then using another CAT Cable between the Router and computer enter the Routers Setup and set it to work correctly and enter your Security protocols.
When this is finished restart the Router as required disconnect the CAT Cable and setup the WiFi link on your computer with the same Security protocols and PassPhrase that was used in the WiFi Router.
Col
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending
Question Unanswered
How Can IT Teams Detect Hardware Bottlenecks in Business Networks?
0 helpful
0 replies
Question Locked
Using multi-NIC setup for NAS + router — better than VLAN?
0 helpful
4 replies
0 helpful
5 replies
Question Locked
Unknown device connected to my network
0 helpful
2 replies
Question Locked
How to change public IP without ISP?
0 helpful
2 replies