Windows Forum

Ask something
Discussion Locked

connectivity problem

0 helpful
9 replies

by dubey_296

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

i am having peer to peer network with win98
from last some time one client machine giving connectivity problem thats why i change the NIC
the card is 10/100mbps ,problem i am geting is it is very slow to respond when i use ping command
its reply but some time it give request timed out
and TTT value is 128 . same NIC i cheack on other
client machine its working fine. Can you plz try to solve my problem? ( the utp cabel is also fine)

9 replies

by evansed1

If the cable and NIC check out, have tried another hub port or another station on that same port?

by dabanner

I had a similar problem with a win98 box on an NT network this week. The machine would logon the NT domain but could not be accessed on the peer subnet for shared resources. I spent the day checking cables, NIC's, Hubs, & locations. I finally removed the TCP/IP protocol, rebooted the machine, and re-installed the TCP/IP protocol. That solved my problem.

by sreevatsa

in network neighbourhood- properties- configurations
keep the NETBEUI PROTOCOL in the top priority.

by jamesrcook

Have you got the latest drivers installed? If you have, try using the previous release as this MAY help.

by dubey_296

atlast I manage to sort out my problem
the problem is in the color coading of the cabel
i used different color coading (AT&T) cabel than other cabels in my network and sort my problem
Thanks all of you help me solving these problem

This discussion is closed to new replies.