Question Locked

Constant beep during boot

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have an HP Omnibook XE3 running Win98 and Phoenix BIOS. When booting from the battery, it beeps constantly without stop, pause, or change in tone. If I shut it off and restart, it boots just fine. If I boot from AC power, it boots just fine the 1st time. Any ideas?

4 replies

by lgrames

You should be able to check the documentation to find out exactly what that beep means. They can be cryptic, but also sometimes helpful.

For my servers, when something fails during the POST there is a specific pattern/tone to the beep.

by opsdire

The documentation shed no light on this issue. There are the normal references to BIOS beep codes, but not this particular issue. The perplexing thing is what's the difference between AC and DC power as associated to startup?

by mjd420nova

The continous beep usually means a memory failure (RAM) or video memory if a plugin card is used. Check to be sure the unit sees all of the memory, a weak power source( without AC adapter) could cause a partial failure of one memory card. Another fault would be that the battery is very low on charge and won't accept any charge. BAD Battery. You really need to check out the user manual for the real meanings.

This discussion is closed to new replies.