Discussion Locked

Convert PC from UNIX OS to Windows 2000

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We have a UNIX box we were using as our file server (with W2K workstations). We have since changed to a W2K server. Now we want to change the old UNIX box over to W2K.

I did not set this machine up, and most of the documentation is who knows where. The machine was set up without a CDROM drive. So first I have to get the software for the CDROM drive installed. How, since the install media is a CD, I have no idea. Next I must format the hard drives and install windows.

Basically this is a huge cry for HELP! Does anyone have any information on how I should approach this (before I pay too much to have an outside source come in and do this)?

Everyone's help will be greatly appreciated.

Dennis Parr
Better By Design

12 replies

by techkid

You've transferred all the user data off of it through the existing network right? If not, obviously do that now.

If so, just install the cd-rom into the machine. Then slip your win2k cd into it and boot off the win2k cd. During setup of win2k you will have the option to format and even re-partition the hard disks.

by techkid

I'm gonna reiterate that if you have a legal copy of Win2k the cd is bootable. So, making floppies to boot off of isn't necessary. Unless of course your Unix box is so old that the bios doesn't support that... then follow the instructions below

by bbd_itadmin

Tried that, the machine does not see the CDROM (it is actually a Sony CDRW drive). Since it does not see it, it will not boot from it. We have a firewire external CDRW drive. I stuck in a firewire card and it is reading from that CD. I created boot diskettes on another workstation, went through the diskettes, got to the CD installation of W2K and it now tells me it cannot find a hard drive. I have no idea what was done to set this machine up originally as it was done by this "guy" the owner knew. Well guess what, he's not around to ask what he did when setting this thing up. We have an old office machine that has been retired because we can't upgrade the memeory without a new motherboard. It has w2K on it. I am going to try and stick its hard drive in. Then one of the other hard drives and see if I can format it as a second drive, then the primary drive.

Thank you for your input. It is greatly appreciated.

Regards,
Dennis Parr
Better by Design

by rabbit_runner

Answer 1 is correct. Now you need assistance to getting cdrom drivers.
1. Install your cdrom on the UNIX box. (I also assume you have a floppy drive already installed)
2. on a Win2k workstation, put the 2000 Server cd in the cdrom. Close all windows and get to the desktop.
3. Using the windows explorer, find your cdrom, open it up and find the directory 'BOOTDISK'.
4. Have 4 floppy disks ready. Run the file MAKEBOOT.EXE (Follow the on screen prompts.)
5. You have made the bootable floppies.
6. Next take the Server CD and put it in the cd rom on the UNIX box.
7. Insert disk 1 and boot the server.
8. During the install process, you will have the ability to delete partitions and format your drive(s).
NOTE: Any current data on the UNIX box, you MUST backup across the network. If you do not, your data will be lost.

If you have any questions, leave a note and I will check back.

Best of luck

by mckenty

Good discussion so far. The only thing I have to add is to ask if, given the invisibility of the CD and HD drives, and the fact that it was a UNIX box, whether they are SCSI devices (vs. IDE.) Are they connected to the motherboard or to card? Trying the other HD from the old box in place of the HD in the problem box might prove instructive.

by techkid

The fact that windows won't see your hard drive leaves me to believe that W2K doesn't have the drivers for a raid card or scsi card in your system. What brand server is it, IBM, Compaq...?

You'll probably have to get the drivers for it from the manufacturer's website. Then you should be able to install windows

by bbd_itadmin

I would like to thank everyone who responded to my question. I would like to fill everyone in on my progress... who knows it may be useful to someone (like the man on the moon).

First off, I would like to clarify something. It WAS a server, we are turning it into a W2K workstation. The idea of putting the drive from a working machine into this one was a no go. However, I took one of the UNIX drives, placed it in the working machine (without its original drive) and low and behold, it told me I had a new or unformatted drive, let me install W2K, boots up, everything. Then... (here it comes)... put it back into the other machine, still does not see the drive. I made sure that the ribbon connections were plugged exactly as the were on the working machine... no go. I put in a SCSI card... no go. The motherboard is an IWILL.COM board. I think it just cannot read windows for some dumb reason.

I have given up... I will just send it out and see if someone else can get any farther than I have.

Again, thanks to everyone who responded to my question. Your input helped me to verify that I was taking the correct steps, unfortunetly, Gate's gremlins must be at work here.

This discussion is closed to new replies.