Question Locked

Copying a Cisco 3500XL config.text file

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello all,

I have been looking around for sometime online as to how to copy the config.text file from an older 3500XL and load it onto a newer one so that I don't have to go through all of the setup.

What I have done so far is download a tftp server onto my laptop and retrieved the file from the old switch using that. Now I'm consoled into the newer one and when I try to run "copy tftp running-config" or "copy tftp flash:config.text" is get an error message stating that there was an error opening tftp://blahblahblah and then

Is there anything that I should be doing?

Thanks in advance...

3 replies

by netman1958

but I have to ask it. You say that you are consoled into the new 3500 but don't mention if you have established network access to it. You do have a minimal config on the new switch with an ip address on the same subnet as the laptop don't you? TFTP won't work through the console cable.

This discussion is closed to new replies.