Question Locked

cpu beeps on boot up, no signal to monitor

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a dell with Windows XP. It would freeze up during boot up and nothing I did rectified it. I reloaded Windows XP, it worked for a bit, I moved the computer to another room and turned it on - no connection to monitor. I checked all connections and reseated all memory and cards. Nothing. I installed a new graphics card - success! it worked. for a few minutes. I tried to install a new ethernet card because the computer didn't seem to be recognizing the old one, ran the installation program and it still didn't recognize the newly installed hardware. uninstalled it, reinstalled it, now the monitor is once again showing no signal from the computer. when i turn on the computer i get 4 beeps, a pause then 2 more beeps. any suggestions?

7 replies

by susan.birch

thanks for the link. I'll check it out. my computer guru buddies at work tell me to chuck it and get a mac. They seem to think the motherboard is shot and I should not put any more money into trying to fix it. Somehow I think there is still hope. The eternal optimist. I'll listen carefull to the beeps this evening and see what I can get from your link.

by cmiller5400

"Chuck it and get a Mac"

My thoughts are try and fix it first if it is economical. Then if you can't, consider other options. I know a few people that have switched to Mac's from PC's and are as happy as a pig in (well you know what) ;)

by 1bn0

They are notoriuosly tempermental when moving a computer. The AGP slot is a poor physical connector. Simply brushing it with your hand can unseat the card enough to cause issues.

Moved one machine two weeks ago, from one desk to another, about 4 ? feet. Had to open it up and remove and replace the video card before it would boot.

by straightp

the beeps mean something, check around the net for what the codes mean.

by susan.birch

I found the beep codes and the "light codes"? and they both indicated a problem with the memeory -which I had already checked. However, I took it all out, cleaned the contacts, reseated everything - again - and poof - success!!!! Thanks for your help

This discussion is closed to new replies.