Question Locked

CPU Usage 100%

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

my home PC Dell 2400 (P4 2.66GHz 512MB) started behaving very slow. Usually my son uses it to download and play games... I noticed the task manager indicating a persistent 100% usage which i attributed to loaded programs in memory. this did not improved when rebooting. since it had been a long time since the last reinstall, i proceeded with a new installation of XP from the Dell recovery disks, which are quite reliable.

to my surprise, after the install the problem persists. since this is already a 4+ year old computer, i am assesing the repair or purchase option. I do not listen to noises from the hard disk that indicate a possible problem, memory shows the full 512. is it possible that some type of trojan be attached in RAM that the reimage did not clear. how can i clean this?
will this slow performace behaviour be attributed to processor failure or something else on the motherboard? I will appreciate any clues and recommendations. thx.

9 replies

by boxfiddler Hot topic

some PROCESS is causing that. Not only will Task Manager inform you at what % your CPU is running, it will inform you as to what process is consuming that %.

For instance, on at least one of my machines FF, after it is open for awhile, gets sluggish. I open Task Manager and CPU consumption is 100%. I select the processes tab and lo and behold, FF is sucking up 97% of the CPU. I then know I need to shut down and restart FF. Nothing is inherently wrong with my machine, FF's notorious reputation for bad memory management is showing its' ugly face.

It helps to know what process is doing the consuming when troubleshooting problems.

by etoro#2

Task manager shows steady 100% utilization, even after XP reinstallation and no other programs installed. In this state the CPU utilization shows at about 40% and when the mouse is moved it peaks to 100%...

by boxfiddler Hot topic

if all it takes to peak usage is moving the mouse. Also, it's worth checking into hunting_bears' recommendation re: dust buildup. Pop open your case and blow it out real good with an air can. I've noted in my own experience that dust buildup influences performance.

by wanttocancel

I've seen computers that accumlate so much dust over the heatsink/fan that they will run the CPU at 100%. Since you reinstalled windows I would rule out viruses/malware. I would open your computer and check out the heatsink/fan. If not then take your computer to a reputable computer repair shop and have them look at it for you.

by ---tk---

I would check and see if the CPU is actually running at 2.X Ghz. Right click "my computer", drag down to "properties". With in the window it should show your CPU speed.

If your CPU was only working at half the normal speed, normal processes would/could cause the spikes.

by etoro#2

no program run or initiated in startup. mostly svchost processes are shown in the processes tab. none of them gets to a high CPU utilization; but the overall Performance CPU usage maxes out to 100%.

This discussion is closed to new replies.