Question Locked

Create 2 subnets with one wireless router with DHCP

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

The situation:
I have 5 sensitive computers on the same network as the public wireless so anyone can see the business computers.

The goal:
I want to separate my business computers from the wireless surfers, but still allow both of them to access the internet.

Currently, the DSL model is connected to the wireless router which has DHCP enabled. 2 computers are connected directly to the wireless router. 3 other computers are connected to a hub which is connected to the wireless router. So naturally, the wireless users can see my work computers which is a big security threat.

I was going to subnet the network into 2 (192.168.1.1/25) so all the wireless users get from 192.168.1.10 to .59 (using DHCP) and then give static IP address to my 5 machines 192.168.1.129 to .124. When I try that the static machines cannot connect to the internet. I have a hub, switch, and wireless router. Is there a better way? if not, how can I get this working?

I have spent the last 2 days surfing the internet trying to solve this problem.

5 replies

by normh3

I don't think you can do what you want to with a single router. If you were to purchase a second router, it can be done. Plug your DSL modem into the WAN port of the first router and then plug your switch into one of the lan ports. Your business PC's will then live on the switch. Plug the WAN port of the second router into another of the lan ports on the first router. Make sure DHCP is enabled on the second router so that the non-business computers get their ip addresses from this. I would change the subnet to something totally different than the first router. If you are going to use the wireless on each of the routers, make sure they have different SSID's. You also want to put each on a seperate channel and place them some distance apart. Let me know if any of this didn't make sense.

by jbbweb

It looks like that is the only possible way to get the security I need. Thanks Norm for the second opinion. I will have to change the architecture of the network and buy a new router. I will have just one wireless access point for all the non-business user and then link up the business computers with cables.

You comment made sense and was helpful. Thanks.

by normh3

It's the least expensive way that I could think of. Good luck.

by 1bn0

I have a Linksys WRV200

http://www.linksys.com/servlet/Satellite?blobcol=urldata&blobheadername1=Content-Type&blobheadername2=Content-Disposition&blobheadervalue1=application%2Fpdf&blobheadervalue2=inline%3B+filename%3DWRV200_ds.pdf&blobkey=id&blobtable=MungoBlobs&blobwhere=1193768638713&ssbinary=true&lid=3195634823B28

One router with multiple SSID's and VLANs.

Setup youur machines on one network ID and the public machines on another.

THe router also acts as a VPN end point so you can setup remote accesss to your network

This discussion is closed to new replies.