5 replies
by djkesaria Accepted solution
by tyler Accepted solution
I have having the same issue with the access point running off of a linksys befsr41 router.
Let me know if you resolved the issue and how. Hopefully its the same solution.
by tyler Accepted solution
by boenkertje Accepted solution
Hi, I hope some of you can help me, I searched the whole internet for an answer but none helped.
I have the accespoint mentioned in the subject.
A firmware version 2.13 of July 2007.
I wanted to upgrade it to 2.13b (beta).
Wish i'd never done it.
Now the thing connects with ethernet but wireless seems to be disabled and even with a cable I can't even browse to the webinterface like before.
the IP 192.168.0.50 gives an error page.
also a hard reset is not possible, I pressed it for 30 secs and it still didn't reboot.
Pls advise!
thx,
Sebastien
by yuriborges Accepted solution
first you have to reset the DWL-G700AP and connect your computer using a cable.
After that, change the IP of the computer to 192.168.0.52
if you do that you will find the IP 192.168.0.50 and after you'll have access to the configuration page
im sorry for my english
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending