4 replies
by bullbert Accepted solution
by robo_dev Accepted solution
if it truly 'crashed' you won't be able to read anything from the drive, typically.
To attempt to read it, either install the drive in a USB enclosure and plug it into a PC, or connect it as a secondary IDE drive in a desktop PC.
by wanttocancel Accepted solution
by oh smeg Accepted solution
I personally always insert them into a External Enclosure and read them from there but you can place it into a Desktop computer that can use this drive type and read it from there also.
Boot the Computer off the Working HDD and then Open My Computer or Explorer and navigate tot he Slave Drive Typically E Drive depending on what you have fitted to your computer.
Open the drive as you normally would and copy the Data off it.
There are however a couple of restrictions here. If you have XP Pro installed and are using EFS [b]Encrypted File System[/b] you need to recover from your backup as the Encryption Engine isn't running that was used to encrypt the Data so it remains Unreadable.
If you had a Password Protecting your Data and needed to Log On Windows your Data will be Protected and you will need to Take Ownership of it or you will constantly get the Error Message that you do not have Permission to access this Data. If that is the case just follow the directions here
http://support.microsoft.com/default.aspx?scid=kb;en-us;308421
Col
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending