Discussion Locked

DDR MEMORY HANGS PC

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I HAVE A AMD 1700 XP CPU AND ECS K7S5A MOTHER MD. WHEN I INSTALLED MEMORY IT THEN WOULD NOT POWER ON..MEMORY IS PC2100 256MEG.. PLEASE HELP

5 replies

by dmiles

Check the cards on the board to make sure they are seated properly

Check the cables to see if they are secure

Take the memory out and try a different orientation depending on the memory size,then make sure that memory is seated secrely in slots

Check the motherboard manual to make sure thatmemory is compatible with the motherboard

by d_v ant

I had the same problem with that mobo. I needed a larger power supply. I installed it into a new case with a 300 watt power supply (mine was 250) and didn't have any more trouble. With the XP processor, I would recommend 350 or 400 watt, depending on how many other devices you have.

Hope this helps....

This discussion is closed to new replies.