Discussion Locked

Delivery of Alternate Print Drivers

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

During the installation of a new printer driver on NT Server 4.0, one of the options is to install drivers for alternate OS Support (i.e. 95 and 98). There is no options for 2000 or XP. Does anyone have a workaround that will allow me to install aWin2k or XP alternate print driver so that when a client (running win2k or XP) connects to the server printer share, the driver for his loacl OS is installed?

Any information would be greatly appreciated.

3 replies

by ann777

It's going to depend on the printer manufacturer and model as to whether the printer driver will support WinXP or Win2000.

Most of the time, the printer driver for the OS needs to be installed locally, then using the "port" tab within the properties of the printer itself, you will either need to re-direct the local printer port to an ip address or a sharename.

Some printers (that do not have specific drivers for the different OSes) will print quite well in a network situation with HP LaserJet Series II drivers (if a laser printer), or a "Generic/Text Only" printer (under Generic manufacturer).

by jeff charland

The printer I am using has 2k and xp drivers available. I am looking to include them on an NT 4 server for automatic distribution to a client PC running 2k or xp connects. NT4 automatically supports the installation of 95/98 drivers onto the NT4 server so that the first time a client running 95/98 connects to the printer, the 95/98 driver automatically gets installed from the NT4 server to the client transparently. I need to extend this to 2k and xp clients.

This discussion is closed to new replies.