Question Locked

Dell Inspiron 5100 BIOS upgrade Failed

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a Dell Inspiron 5100 with BIOS A03. Tried to upgrade to A22 by a externel 3? floppy disc. I worked fine until i was promted upgrade from A03 to A22 "Y". Then i chrashed and i cant turn it on any more. Any suggestions besides buy a new computer?

2 replies

by oh smeg

If you wish to keep this N+B you will either need a New M'Board or some way to reinstall the BIOS onto the EPROM that is soldered onto the M'Board.

As only a Electronics Repairer can do the last it will probably be cheaper to buy a new M'Board and have it fitted. The labor costs for the dismantling and reassembly will be the same as both require the removal of the M'Board and refitting.

Or to do the job properly you could have the BIOS Chip Unsoldered from the M'Board and have a Socket for that Chip Type soldered tot he M'Board and then buy a replacement BIOS Chip from a place like BIOSMAN and have that fitted tot he newly installed socket.

http://www.biosman.com/

Because these Chips are soldered to the M'Board you need special equipment to remove them without doing other damage to the M'Board and this is not cheap, not to mention that people with experience are required to do this type of work so that they do not do any damage. As a customer you end up paying for that equipment and experience that is required to do this type of work.

Or you could remove the HDD in this NB fir it to a USB Caddy and then plug it into another computer to recover your data.

Col

This discussion is closed to new replies.