dell insprion 6000 power outlet not working
I am trying to find out if someone knows how to fix the power outlet on the back of the dell computer it seems to be loose and will not charge the battery .
Thanks
Carol
Windows Forum
I am trying to find out if someone knows how to fix the power outlet on the back of the dell computer it seems to be loose and will not charge the battery .
Thanks
Carol
by carolinesnow Accepted solution
by hal 9000 Accepted solution
First is to make sure that you have the correct mains adaptor as different ones have different size plugs and different voltages which may be an issue.
But if you have the correct Mains Adaptor your only choice is to dismantle the NB remove either the Power Board or the M'Board and re-solder the socket back on or replace the socket entirely if there is any damage to it. This is the most likely thing to have happened as NB's get moved around and most times the mains adaptors don't get unplugged so any damage that is going to happen happens to the socket that the mains adaptor is plugged into and the socket gets broken.
To repair these you need a specialised Electronics Soldering Iron and Electronics Solder with a high silver content and very thin so that you don't end up making a mess on the circuit board and shorting out tracks and doing more damage than you are attempting to fix. A Solder Sucker proves very useful here as well because it can remove any solder before you remove any broken parts and after the part has been removed it can clear away all the excess solder so that the holes in the circuit board are clear and you can push in the new component.
But if the Circuit Board has a crack in it you need to replace the entire circuit board.
Col
This discussion is closed to new replies.
Sort by Trending