6 replies
by d67y2k Accepted solution
by oh smeg Accepted solution
For a Dell Latitude 300 at Dell what type of HDD is this?
If it is IDE how big is it and how big was the one that came out of the NB. If it is an IDE Drive it is possible that it is too big for the BIOS to correctly recognize. Every BIOS has a Upper Limit for IDE HDD's and this can not be exceeded and still have the computer work easily. You may be required to Flash the BIOS to be able to use a Bigger HDD but then again there may not be any new BIOS available for this unit that will use a HDD as big as you have purchased.
Col
by d67y2k Accepted solution
by oh smeg Accepted solution
The old Toshiba Drive has a capacity of 6.4 Gig and the replacement drive has a capacity of 12 GIG. This is most likely too big for this NB's BIOS to MAP correctly so you'll need to use something like Seagate's Disc Wizard to fool the BIOS into seeing the HDD Correctly.
Though here I'm not sure how well that will work with a Fujitsu HDD.
Ideally a smaller drive somewhere around the 7 GIG capacity would be easier to use here.
Col
by d67y2k Accepted solution
by oh smeg Accepted solution
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending