Question Locked

Dell PE 1750/ Server 2003 cant install

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am trying to load Server 2003 on a Dell PowerEdge 1750. Whenever the screen comes up prompting me to install Windows, it says "Set up can not find any hard drives installed in your computer....Set up can not continue"

The thing is, I have 3 hard drives currently in the server, with almost a full TB worth of space (all the drives are working properly, no error lights, sounds, etc). I went into the BIOS configuaration, cleared the drives, turned them online, put them in an array, rebuilt, initilzed them but still I get the same error. I know I need to do something in the BIOS / Utility Configuration, but I can not figure out what I am doing wrong here.

3 replies

by bart777

You need to start the install process with the CDs that were provided with the server. This will install the correct RAID controller software so that the OS can see the disks. It will also put in the rest of the drivers that will be required like the NIC and Video.

If you don't have the CD go out to the Dell support site and enter the service code from the box. You can search for the ISO and download the image to burn to a CD.

It's a nice simple process.

Best of luck.

by oh smeg

Press the F6 Key when the first blue Screen appears and wait till prompted to insert the Drivers on the Root of a Floppy in the A Drive and then press Enter.

If you don't have a Floppy Drive available you can make a Slip[streamed Install Disc with the required Drivers by either following the directions here

http://tinyurl.com/326fg3

http://tinyurl.com/5q2jsw

Or you can use nLite to do the same thing.

http://tinyurl.com/e2mo4

Col

This discussion is closed to new replies.