Question Locked

Dell w/XP Wireless Netwk Connection Unavailable; Have Sierra Wireless Card

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Sierra Wireless 875U and connect using their 3G Watcher software. However, I want to also use my home Wifi DSL thru Charter. The 3G won't connect to the Wifi. Is there a way to have both services?

Till recently I was using AT&T Communication Manager to connect each service when I wanted, but the Communication Manager was running very slowly and using 100% of my CPU all the time. Repairing, reinstalling didn't do any good so that's why I switched to 3G.

I'd like to use the Windows networking connection system but I can't access it because AT&T disabled it. I uninstalled AT&T but still can't access it.

Is it possible to use the Windows system for both the PC card and the Wifi? How can I access the system? Will I ever be able to connect to Charter again?

Thanks

3 replies

by oh smeg

No there is no way to have both services running through the Serria Card as it doesn't access WiFi Technology for Local Area Networks. It works on a completely different Radio Band.

You can however fit a WiFi Card that works on the 802.11 System as apposed to the 3G Cell Phone System. The 802.11 System is a very short range low power device that will not transmit over more than 500 meters.

[i]Is it possible to use the Windows system for both the PC card and the Wifi?[/i]

Technically speaking yes this is possible you can use the 3G network to connect to the Internet and use the WiFi side of the system to connect to a internal LAN. But here it is possible that this was disabled to maintain your security to prevent your 3G Connection being used by others unauthorized people to steal your Internet connection.

As for being able to use the WiFi again you need to run the Wireless Network Setup Wizard and reconfigure your WiFi Network. To do this you'll need to look in the help files of your OS to see how this is done. Different Window OS have different procedures and as you didn't mention which version of Windows you are using I can not offer any further advice.

Col

This discussion is closed to new replies.