Question Locked

DHCP Client blocking software

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I recently installed Simply accounting on 2 windows XP sp2 machines. Simpy accounting has a Connexion manager that is supposed to run automatically, but for some reason the DHCP client is blocking it. The only way to get it working is to disable the DHCP client, then start the connexions manager, then re-start the DHCP client.

The problem is that the people working on the machines do not have administrative rights, and cannot be given administrative rights, so they can't do this. Simply accounting has told me that this is the only option.

I am thinking that a possible solution is to disable the DHCP client on those machines, and give them static IP addresses. These machines are never connected to the internet, they only connect to our internal setwork.

Also, I installed the software on a Dell laptop running on Windows XP as well, and have had no problems.

My questions are:
1- Can this work, or will disabling the DHCP make the users unable to connect to the network
2- How do I find out what static IP addresses I can give these machines (is there somewhere I can look on the Windows server?)

8 replies

by wizard-09

Yes it can work, DHCP only gives out IP addresses so the user will still be able to connect to the network as long as you give it a static address.

To find IP addresses not being used on your network scan your network range 192.168.1.1 - 192.168.1.225 then when you get a adddress that is free assign it as static address as you would your servers and add it to the ip config of the desktops in question.

Edit to add the below

You can disable the DHCP service on the local machine, goto start then type services.msc, then find DHCP right click then disable.

Keep us informed as to your progress if you require further assistance.

If you think that any of the posts that have been made by all TR Members, have solved or contributed to solving the problem, please Mark them as Helpful so that others may benefit from the outcome.

by frogchicky

How do I scan the network range? I am kind of learning how the network works "on the fly"

Also, do I have to assign it as static on the server, if yes, how?

by wizard-09

Its called a port scanner i use Advanced port scanner google it then download and install on your computer then scan the network using this tool it will tell you what addresses are alive and which are dead so you can use the dead addresses as these are free and not in use.

Keep us informed as to your progress if you require further assistance.

If you think that any of the posts that have been made by all TR Members, have solved or contributed to solving the problem, please Mark them as Helpful so that others may benefit from the outcome.

by frogchicky

So far it looks like it worked. I am going to let this run on one of the computers for a while just to make sure no bugs pop up.

Thanks

by wizard-09

To hear that it worked hope you have no problems, you should not have any problems as long as you have it set as static address and not other machine is using that IP address.

by frogchicky

The person that I did this for is now reporting that when she opens or saves anything to the network that it is really slow. Could it be because of this?

by wizard-09

This would not be the result of you doing this, are the network drives mapped or not?

Have you done a ping or tracert from the command line to see how long it takes to get from A to B this would just be some of the steps I would take to look at this problem.

Keep us informed as to your progress if you require further assistance.

If you think that any of the posts that have been made by all TR Members, have solved or contributed to solving the problem, please Mark them as Helpful so that others may benefit from the outcome.

This discussion is closed to new replies.