Question Locked

DHCP lease map to mac address

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,

In current DHCP server, many times a single host is assigned more than one active IP addresses against its MAC address, and this causes the DHCP Scope to get full.

By observation we found that, in lease file everytime the UID from the same host changes and thus it is assigned a new IP everytime while not freeing up the last assigned IP address.

How can DHCP server be configured to simply ignore UID and assign the IP addresses against the hosts MAC address not against its UID ?

4 replies

by davedxb

You can do that in the DHCP manager. Same place where you configure DHCP.

Create RESEREVED DHCP address....when you crate it...it will show you a field "MAC ADDRESS", thats where you put in the mac address of the user. So everytime that users pops in..they will only get that ip address....

by shashi_comp

But in that case would it be wise idea to reserve ip for individual hosts.

by davedxb

it depends how you use the network. I reserve IP addresses for my firewall to know who is who :)

This way, they cant run away! But dont forget some of the employees are smart and manually put in an IP....

So it really depends what you need it for.

You said your problem was the DHCP didnt clean itself up and the same user took many IP's.

Two options available when you lease an IP.
-duration of time (1 day)
-Forever

Make sure you lease an ip to a user for a limited time, like 1 day or 2. If the time expires and user is still using the network. No problem, it gets renewed.

This discussion is closed to new replies.