Question Locked

DHCP on Microsoft Small Business Server 2003

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am a power-user but definately not an IT professional trying to install Microsoft Small Business Server (SBS)2003 on a Dell PowerEdge 840 Server. We have about 13 PCs running Windows XP Pro on a peer-to-peer Network. Internet is through a dsl modem and a Belkin N1 Router which currently handles Assigning IP address3es. All the PC's connect through a 24 port D-Link Switch.

1. I've read from several online forums and in the SBS manual that says the SBS server must be setup as the primary DNS controller( I didn't do this and Dell people tell me the only way to switch this reliably is to reinstall). Does this mean that the existing router can be a secondary controller and hand out some IP adresses or does SBS have to handle it all? If so how can this be setup? I wanted to make the changeover a few clients at a time to make sure all the bugs were worked out but is this possible?

2. SBS 2003 allows 1 or 2 Nic card setup ( one for WAN one for LAN). After installing it with one Nic card I read online that two are best or DNS problems will sometimes occur? What is best practice ( pros and cons) and why?

3. I've heard that although VPN can be done through SBS 2003 it is a big security risk and that this is best handled by another appliance. What are your thoughts? What would a separate appliance that could do VPN look like? Will my existing Belkin router handle VPN traffic?

6 replies

by cg it

go get Windows Small Business Server 2003 administrators companion.

this will give you all the information you need to setup SBS and administer the network once you have it setup.

by johnson.charles.c

Andy,
I'll try and answer in order:

1)There are no secondary DHCP servers allowed per lan/wan segments, 1 only. You do not have to re-load or reinstall anything to set it up. Just activate it, you can find guides online (Google). SBS works best in a condition where it handles all HTTP/DNS/DHCP/AD.

2)If you have an existing router, , then you only need the one NIC on your SBS. You only need two if you have no router and are using the SBS box for that function. DNS should be set by your DHCP (on the SBS), so all your client only query the SBS box. The SBS then in turn fwd's queries to your ISP.

3)Do not try to handle VPN with the same "do-everything-box" that is SBS. Use a hardware solution, I have had great success with off-the-shelf product by Linksys and Netgear. This way you mitigate the dangers to your SBS, and offload the vpn tunnel encryption to the dedicated processors on the hardware endpoints.
I just finished a project involving all this, so if you need more assistance, email me.

by cg it

a DC doesn't really require DHCP. DHCP is handy for handing out addresses to a LOT of client computers and relieves the burden of having to track addresses.

With the SBS box, DHCP is installed automatically. It's best to turn off the routers DHCP server and let the SBS box hand out addresses. SBS is wizard run and a lot of the tasks that would normally be manually created in Windows 2003 server are automated in SBS. So when you run the connect to the internet wizard all configuration [including DHCP] is handled by the automated setup process. If you choose to uninstall or disable DHCP, often clients can not contact the SBS box.

The reason for 2 NICs is the connect to the internet wizard. When run it configures DHCP to specify the SBS box as the DNS server. To have interenet access you have to specify your ISPs DNS servers. This is why 2 NICs are better than 1.

for VPN, you could opt for L2TP VPN traffic if you don't want to use PPTP. If your belkin router will operate as a VPN server clients could connect to it to gain access to the network instead of VPN passthrough.
There's many choices and L2TP is the most secure nowadays.

Still recommend you getting the administrators companion book for SBS 2003.

by andy.monnin

I did get the book and it's been a tremendous help. We've decided to use the Remote Web Workplace and forgo VPN for now, although I may set ip up just so I know I can. Thanks.

by cg it

I usually recommend that anyone dealing with an SBS 2000/2003 environment get the Admin companion/kit book.

This discussion is closed to new replies.